Everflon™ PFA (perfluoroalkoxy) fluoroplastics are available in pellet or powder form, and combine the processing ease of conventional thermoplastic resins with the high performance properties of Everflon™ PTFE.
Everflon™ PFA fluoroplastics are processed by conventional melt-extrusion techniques and by injection, compression, rotational, transfer and blow-molding processes. Everflon™ PFA fluoroplastics are ideal for wire coating and molding a wide variety of end use articles and components .
Products fabricated from genuine Everflon™ PFA are unaffected by most chemicals and feature superior electrical, low friction and mechanical properties and offer a wide service temperature range, up to 260°C (500°F).
Everflon™ PFA provides superior creep resistance at high temperatures, excellent low temperature toughness and exceptional flame resistance. Special grades of Everflon™ PFA (E series) have been developed to meet the rigorous demands of the semiconductor industry for purity, low extractable levels and minimal outgassing.
Additional grades of Everflon™ PFA are available to support roto molding and other specialty applications.
These resins combine the processing ease of conventional thermoplastic resins with the excellent properties of Everflon™ PTFE (polytetrafluoroethylene), which include:
High chemical resistance
Superior electrical properties
High continuous service temperatures up to 260 °C (500 °F)
Superior creep resistance at high temperatures
Excellent low-temperature toughness
Exceptional flame resistance
| Type and Grade | Characteristics | Applications |
| PFA 403 |
MFI: 2-4 for moulding |
Seals, valve seats, gaskets, tank lining |
| PFA 410 |
MFI: 6-16 for extrusion |
Tubing and jacket of wire |
| PFA 420 |
MFI 20-30 for extrusion and injection |
Insulation of wire&cable |
| PFA 430 |
MFI 33-40 for extrusion and injection |
Thin wall wire insulation |
 |
 |
 |
Everflon™ Fluoropolymer PFA Worldwide
--------------
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
------------------
 |
 |
-----
 |
 |
 |
 |
-----
|
Everflon+ PFA Color Concentrate and Pre-cololred Resin Reap the benefits of excellent pigment dispersion in your final polymer mix with Everflon+™ masterbatch formulations for PFA polymers. Pigment concentration and viscosity can be tailored to your specific application, and formulations are suitable for end-products with wall thicknesses that are as thin as one millimeter or 25 microns.
|
Everflon+ PFA Foam Resin Foamed Fluorinated Ethylene Propylene, also referred to as Foamed PFA, is a form of fluoropolymer insulation. As it sounds, the insulation is a form of foam. It has similar properties to PFA and is very resistant to chemicals, has a broad temperature range and exhibits excellent electrical properties.
|
Everflon+ PFA Conductive Resin Conductive polymers such as FEP and PFA are a class of materials that exhibit electrical conductivity while maintaining the mechanical properties and processability of traditional polymers. These materials have garnered significant attention and research interest due to their unique combination of properties, which offer a wide range of potential applications. |
|
 |
 |
 |
If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.
