Everflon®PTFE (polytetrafluoroethylene) granular fluoroplastics are ideal for compression molding a wide variety of components and shapes; such as rods, tubes and sheets. Products fabricated from genuine Everflon® PTFE are unaffected by most chemicals and feature superior electrical, low friction and mechanical properties.
Products manufactured with genuine Everflon® PTFE are rated for continuous service at 260°C (500°F).
Everflon® PTFE granular fluoroplastic resins are considered non-melts and are generally converted to finished articles in a three step process.
1) The resin is compression molded into a shape form (rod, tube, sheet).
2) The shape, once removed from the mold, is then sintered above its melting point to form a solid PTFE billet.
3) The solid PTFE billet is then machined into the finished article.
Type and Grade | Characteristics | Applications |
PTFE M40 |
Granular powder with 40um particle size |
Seals, valve seats, gaskets, tank lining, fluid handling |
PTFE M180 |
Granular powder with 180um particle size |
|
PTFE F100 |
Fine powder with RR:100 for paste extrusion |
Insulation for wire and cable, tubing, pipe liners, films, |
PTFE F500 |
Fine powder with RR:500 for paste extrusion |
|
PTFE F1000 |
Fine powder with RR:1500 for paste extrusion |
|
PTFE G401 |
Pelletized resin for free flow molding |
Seals, valve seats, gaskets, tank lining, fluid handling components and |
PTFE MV1 |
Micropowder with 1-3um particle size |
Additive to lubrication and grease |
PTFE MV3E |
Micropowder with 3um particle size |
Additive to Elastomers |
PTFE MV3C |
Micropowder with 5um particle size |
Additive to Coating&Paint |
PTFE MV3I |
Micropowder with 1-3um particle size |
Additive to Ink |
PTFE MV5P |
Micropowder with 9-12um particle size f |
Additive to Plastic |
PTFE D60 |
Liquid dispersion with 60% PTFE solid |
Industrial coating |
If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.