Everflon™ FEP (fluorinated ethylene propylene) is a melt processable fluoroplastic. Everflon™ FEP can be used in applications that don't require the enhanced properties, and temperature rating of EverflonTM PFA.
Everflon™ FEP fluoroplastics are processed by conventional melt extrusion techniques and by injection, compression, transfer and blow molding processes. Everflon™ FEP fluoroplastics are ideal for wire coating and molding a wide variety of end use articles and components.
Everflon™ FEP offers an excellent combination of properties characteristic of all fluoroplastics; a wide service temperature range, exceptional dielectric and electrical properties, low coefficient of friction, low flammability and chemical resistance. Everflon™ FEP has a service temperature range, up to 200°C (392°F).
While Everflon™ FEP can be fabricated into solid shapes and molded articles it is best known as an industry leading product line in the wire and cable industry where it is used for wire coating and cable jacket fabrication. Everflon™ FEP offers wire and cable OEMs a high performance fluoroplastic material with excellent electrical properties, ease of processing and consistent performance.
The Everflon™ FEP product line is one the broadest in the industry. With Melt Flow Rates (MFR) from 3 to 30, and a wide range of application specific grades, Everflon™ FEP is uniquely positioned to offer exceptional performance in both general purpose and high speed wire and cable constructions.
| Type and Grade | Characteristics | Applications |
| FEP 4601 |
MFI: 1.5 for moulding |
Seals, valve seats, gaskets, tank lining |
| FEP 4603 |
MFI: 2-4 for extrusion&moulding |
Tubing with thickness and jacket of wire |
| FEP 4608 |
MFI 6-8 for extrusion |
Tubing |
| FEP 4610 |
MFI 8-10 for extrusion |
Tubing and Wire jacket |
| FEP 4610 X |
MFI 6-8 with High crack resistance |
Injection Molding, tubing and wire jacket |
| FEP 4622 |
MFI 20-24 for extrusion and injection |
Insulation for wire and cable Injection parts |
| FEP 4622 HT |
MFI 20-24 with higher crack resistance and working temp |
Insulation for wire and cable Injection parts |
| FEP 4630 |
MFI 27-33 for high speed extrusion |
Insulation for wire and cable |
 |
 |
 |
 |
 |
 |
Everflon™ Fluoropolymer FEP Worldwide
--------------
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
------------------
 |
 |
-----
 |
 |
 |
-----
|
Everflon+ FEP Color Concentrate and Pre-colored Resin Reap the benefits of excellent pigment dispersion in your final polymer mix with Everflon+™ masterbatch formulations for FEP polymers. Pigment concentration and viscosity can be tailored to your specific application, and formulations are suitable for end-products with wall thicknesses that are as thin as one millimeter or 25 microns.
|
Everflon+ FEP Foam Resin Foamed Fluorinated Ethylene Propylene, also referred to as Foamed FEP, is a form of fluoropolymer insulation. As it sounds, the insulation is a form of foam. It has similar properties to FEP and is very resistant to chemicals, has a broad temperature range and exhibits excellent electrical properties.
|
Everflon+ FEP Conductive Resin Conductive polymers such as FEP and PFA are a class of materials that exhibit electrical conductivity while maintaining the mechanical properties and processability of traditional polymers. These materials have garnered significant attention and research interest due to their unique combination of properties, which offer a wide range of potential applications. |
|
 |
 |
 |
If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.
