High performance fluoroplastic with excellent temperature, chemical and low friction performance.
|
Low coeffecient of friction Upper service temperatures to 260°C Strong chemical and solvent resistance Ease of processing (compression molding) Finished shapes require sintering |
|||
 |
 |
 |
 |
View All Everflon™ PTFE Granular Product
Excellent chemical resistance, lubricity properties, wide service temperature range, and dielectric performance.
|
Processed via paste extrusion Upper service temperatures to 260°C Strong chemical and solvent resistance Must be stored below 66°C Excellent mechanical strength (Hose/Tubing) |
|||||
 |
 |
 |
 |
 |
 |
View All Everflon™ PTFE — Fine Powders Product
Lower molecular weight, smaller particles (2 to 20 µm) than PTFE.
|
Non-melt processable Additive to other host materials Low molecular weight Can enhance lubricity of finished articles Excellent chemical and solvent resistance Well suited for coatings |
|||||
 |
 |
 |
 |
 |
 |
View All Everflon™ PTFE — Micro Powder Product
Excellent processability in general purpose and high speed wire and cable constructions.
|
Melt processable Superior electrical properties Upper service temperatures to 200°C Strong chemical and solvent resistance Ease of processing (wire & cable extrusion) Good low temperature performance |
|||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
View All Everflon™ FEP Product
Combines ease of processing with similar properties to Everflon™ PTFE.
|
Melt processable Upper service temperatures to 260°C Strong chemical and solvent resistance High purity variants available Excellent low temperature toughness |
|||||
 |
 |
 |
 |
 |
 |
View All Everflon™ PFA Product
Superior impact strength, abrasion and cut through resistance when compared to PTFE, FEP and PFA.
|
Melt processable Upper service temperatures 150°C – 200°C Excellent abrasion resistance Superior electrical properties Ease of processing |
|||||
 |
 |
 |
 |
 |
 |
View All Everflon™ ETFE Product
Provides PTFE performance characteristics in a liquid dispersion.
|
Used as a coating/additive to articles Available in PTFE, FEP and PFA formulations Practical application methods |
|||||
 |
 |
 |
 |
 |
 |
View All Everflon™ Aqueous Dispersions Product
Fluoropolymer technology in powder coatings is an innovation that has set new standards.. Notably, fluoropolymer in powder coatings is leveraged for its exceptional durability and resistance to environmental factors.
|
Exceptional Weather Resistance Available in ETFE, FEP and PFA formulations Chemical Resistance Quality Finish |
|||||
 |
 |
 |
 |
 |
 |
View All Everflon™ Fluoropolymer Powders Product
Fluoropolymer tubing stands out among other materials for its exceptional versatility and array of unique properties, and each type of fluoropolymer provides distinct advantages to various applications. Whether you seek tubing with high tensile strength, tubing with exceptional chemical resistance, or tubing with a high use of temperature, you're sure to find it in the Techyours™ collection of fluoropolymer tubing
View All Techyours™ Fluoropolymer Extrusion and Tubings ProductMasterbatch and Pre-colored on the basis of ETFE, FEP and PFA.
|
Everflon+™ Color Concentrates are used in injection molded parts, tubes, colored wire insulation, or any products that require pigmentation. The Product line includes color concentrates based on FEP, ETFE, MFA, PFA, melt processable fluorinated copolymers with a range of flow rates for various processing and application needs. |
 |
View All Everflon+™ Fluoropolymer Color Concentrate Product
PTFE industrial coatings are commonly used in mold release applications for products such as golf balls and rubber mats, but can be utilized in multiple applications and uses.
|
The highest operating temperature of any fluoropolymer (260 °C [500 °F]) The lowest coefficient of friction Good abrasion and chemical resistance |
 |
View All Techyours™ Fluoropolymer Coatings Product
|
Chemical compatibility, inertness, and solvent-resistance to nearly all chemicals Superior anti-stick and low frictional properties with high resistance to impact and tearing Useful physical properties at cryogenic temperatures Long-term weather resistance, including a high transmittance of ultraviolet radiation and other radiation (except for far infrared [FIR]) |
|||||
 |
 |
 |
 |
 |
 |
View All Cathay™ Fluoropolymer Films Product
Supply as FEP, PFA and ETFE compound.
|
Everflon+™ Conductive fluoropolymers are manufactured as ready-to-use products and used in self-regulating or constant wattage heater cables, static dissipative fuel lines, and other applications where conductivity or static dissipation is required. C&F offers standard conductive grades in ETFE FEP and PFA |
|||||
 |
 |
 |
 |
 |
 |
View All Everflon+™ Conductive/Anti-Static Fluoropolymers Product
Chemical and Physical form type
|
Everflon+™ Foamed FEP products have a lower dielectric constant and a lower dissipation factor thus minimizing signal loss andenhancing high-speed data transmission of data cables. In addition, foamed products are lighter in weight compared to similarconstructions using a solid wall and results in a reduction in FEP usage, which leads to a cost savings. |
 |
View All Everflon+™ Foam Fluoropolymers Product
HEPA filters, wet processing equipment components
O-rings, seals, gaskets, parts and tubings
Anti-reflective coatings
Components of electronic devices (e.g., Hard disk drives)
Welding and soldering agent
Insulation in wires and cables
Powder coating for phone and tablet screens
Sensor applications
View All Semiconductors ProductIndustrial, commercial and consumer cookware and bakeware
Water and oil-repellent coating on paper products and packaging (cans, bags, etc.)
Conveyor belts for cooking and drying foodstuff
Processing / polymerisation aids for plastic film production
Process lubricants
View All Food Processing ProductInfrastructure for transport and storage of hydrogen (lining materials, seals etc.), seals in liquid organic hydrogen carrier technologie
Potentially in turbines in flanged connections in order to mitigate leakages, in power generation using H2.
Binders in electrodes of batteries, separator coatings, additives in the electrolyte, gaskets/seals, pipes, valves and sealings in the battery itself, manufacturing of positive electrodes for Li-ion cells
Solar panel and wind turbine blade coatings.
Solar panel coatings, O-rings, seals, gaskets, proton exchange membranes in fuel cells, in alkaline electrolysers and for hydrogen production via electrolysis, binder materials in the electrodes, both anode and cathode, and as a component of the gas diffusion layers (GDLs).
View All Energy/Pollution Control ProductWire & cable insulation, plenum cable insulation
Bridge and offshore pad bearings
Greenhouse films
PTFE-thread seal tapes for pipes
Architectural protective and decorative coatings (e.g., on bridges), laminates, resistant paints, anti-graffiti and antifouling coatings, surface treatment in natural stone, metal, glass, plastic
View All Construction ProductChemical resistant components (e.g., seals) and coatings for extraction, transport and processing of petroleum and ores
Wire and cable insulation and covering
Coating for sensors
View All Petroleum/Mining Product
